From site visit to customer offer

How Measure2Make works

1. 01

   Measure the room

   Enter the back and side walls, ceiling height, doors, windows and service points. The front wall connects the side-wall ends and its length is calculated, not independently entered. Rectangular rooms, unequal side walls and a measured rectangular back-corner cut-out are supported; arbitrary polygons and curves are not.

2. 02

   Plan the furniture

   Choose furniture for the selected room, edit its W × D × H dimensions in millimetres and arrange it on the scaled 2D plan. Move pieces between four walls or place supported freestanding pieces on the floor. Warnings identify boundary and feature conflicts; final quotes are blocked for unresolved door/window coverage and invalid measurements.

3. 03

   Prepare the quote

   Use your own material and labour costs. Price purchased furniture and appliances separately, including quantity. Simple and Detailed proposals share the same total. Materials and labour are included in the workshop subtotal; delivery is included in the legacy combined installation charge, with its calculation displayed.

4. 04

   Review workshop information

   Inspect draft cabinet parts, edging, sheet allowances and hardware assumptions tied to the same project dimensions and revision as the quote. Thickness, clearances and allowances can be edited. Drawer and sliding-door formulas are estimates; special constructions may be omitted with warnings. Every cut list needs a workshop check before cutting.